DEP KTM 250-300 EXC 11-16/HUSQVARNA TE 250-300 SILENCER
DEP KTM 250-300 EXC 11-16/HUSQVARNA TE 250-300 SILENCER
DEP KTM 250-300 EXC 11-16/HUSQVARNA TE 250-300 SILENCER
DEP KTM 250-300 EXC 11-16/HUSQVARNA TE 250-300 SILENCER
DEP KTM 250-300 EXC 11-16/HUSQVARNA TE 250-300 SILENCER

DEP KTM 250-300 EXC 11-16/HUSQVARNA TE 250-300 SILENCER

Regular price $219.95

𝙐𝙣𝙩𝙤𝙪𝙘𝙝𝙚𝙙. 𝙁𝙪𝙡𝙡𝙮 𝙋𝙖𝙘𝙠𝙚𝙙 𝙁𝙧𝙚𝙨𝙝 𝙋𝙧𝙤𝙙𝙪𝙘𝙩

PROUDLY SOLD BY MX STUFF  ●  REAL RIDERS NOT RETAILERS

Our 2 stroke silencers are designed to fit OE and DEP front pipes. The silencers are manufactured with a polished aluminium outer canister and a mild steel internal perforated core, surrounded with a high temperature Eglass packing. All silencers have been designed as a performance enhancing product for optimum power increase, we advise this to be used with a DEP front pipe. Our silencers are easily repackable.

  • Improved power and throttle response to OEM silencers
  • Alloy silencer body easily repackable with stainless end cap
  • All 2 strokes silencers are noise legal Australia wide
  • New range of retro/classic racing models available

2 Stroke Silencer Fitting Instructions

Loosen the silencer mounting bolts from the frame and remove your original silencer from the bike. Install the DEP silencer, making sure it does not touch the sub-frame before tightening mounting bolts. Retain any rubber grommets/sleeves from the original silencer and refit on your DEP silencer, if required. All the exhaust fixing points should be slackened and then fully tightened allowing all frame mounting points to line up exactly. A silencer fitted under stress can cause failure or damage to the product. DEP cannot be held responsible for any incorrectly fitted products. The fitting to non-original equipment or DEP equipment is the responsibility of the end user.

2 Stroke Silencer Re-packing Instructions

The performance and low noise efficiency of this silencer will be impaired if it is not serviced on a regular basis. Remove the bolts or rivets, remove the end caps, inner core and packing material. Inspect and clean where necessary. Re-pack the silencer with DEP matt packing. To maintain peak performance the silencer should be inspected regularly and the packing material replaced if it has exceeded its serviceable life.

BIKE FITMENT

If your bike is listed below, this product will suit it.

  • Husqvarna TE250 2014
  • Husqvarna TE250 2015
  • Husqvarna TE300 2014
  • Husqvarna TE300 2015
  • KTM 250 EXC 2011
  • KTM 250 EXC 2012
  • KTM 250 EXC 2013
  • KTM 250 EXC 2014
  • KTM 250 EXC 2015
  • KTM 250 EXC 2016
  • KTM 300 EXC 2011
  • KTM 300 EXC 2012
  • KTM 300 EXC 2013
  • KTM 300 EXC 2014
  • KTM 300 EXC 2015
  • KTM 300 EXC 2016
      DEP KTM 250-300 EXC 11-16/HUSQVARNA TE 250-300 SILENCER
      DEP KTM 250-300 EXC 11-16/HUSQVARNA TE 250-300 SILENCER
      DEP KTM 250-300 EXC 11-16/HUSQVARNA TE 250-300 SILENCER